Product Data Sheet
Product Description:
PE Stretch Film
Dimension: 500mm x
15mic x 300m
Thickness: : +2, -2 mic For inquiries on this product:
Width: : +2, -2 mm Text or Call: 0908-424-2232
Standard roll type: 1.5 kg/roll including core
Standard packaging: 8 rolls/box
Price per Roll: 260.00 PhP (Subject to change w/o prior notice)
Technical data sheet:
Tensile Strength @Break - ASTM
D-882 > 10 N/mm2 (MD) > 8 N/mm2 (TD)
Elongation (min) - ASTM
D-882 >
260% (MD) > 600%
(TD)
Load Break - ASTM
D-882 >
10N (MD) > 4N
(TD)
Tear Resistance - ASTM
D-1922 > 1400nM (MD) > 2000nM (TD)
Dart Impact (min) - ASTM
D-1709 >
50g
Peel Cling (min) - ASTM
D-5458 >
5M-mm
Puncture (min) - ASTM
D-5748 >
1100N-mm
Stretch level - ASTM
D-4649 > 300%
Material:
The film is a cast 3-layer wrapping film made from a special
Mettalocene Octene based Linear Low Density Polyethylene (LLDPE) resin.
Storage Condition:
Dry and clean are protected from direct sun light. Do not
expose to excessive heat or temperature.
Additional Info:
This information has been carefully compiled from
experiences gained in field conditions and laboratory testing. However the product’s
performance and it’s suitability for customer’s purpose depend on the
particular conditions of use and the materials being packed. The specifications, properties and applications mentioned
were based on reliable and standard laboratory testing procedures. Users of
this film should make independent assessment of its suitability and
applicability to their end use.
MATERIAL SAFETY DATA
SHEET
1. PRODUCT: Cast Stretch Film
2. COMPOSITION /
INFORMATION ON INGREDIENTS
Plastic stretch film manufactured from raw material of
Co-Polymer of ethylene and octane/Hexene/Butene. Extruded under controlled processing
conditions using Statistical Process Control.
3. HAZARDS
IDENTIFICATION
EMERGENCY OVERVIEW
*Color: Clear appearance:
Thin plastic film Odor:
None Toxic fumes released in fire
situation
POTENTIAL HEALTH EFFECTS
EYE: Plastic cast stretch film will not cause irritation to
the eyes under normal use.
SKIN: Essentially non-irritating to the skin. A single prolonged exposure is not likely to
result in the material being absorbed into the skin, nor cause any irritation
to the skin
INGESTION: Small dose
oral toxicity is believed to be very low.
No hazards anticipated from in- gestion incident to industrial
exposure.
SYSTEMIC: (OTHER TARGET ORGANS) EFFECTS: No relevant
information found.
CHILD SAFETY: Keep
plastic film away from small children, infants and babies as it may cling to
nose or mouth and prevent breathing.
4. FIRST AID
Ingestion: No
adverse effects anticipated by
this route of
exposure incident to proper industrial han- dling
5. FIRE FIGHTING
MEASURES
FLAMMABLE PROPERTIES
FLSH POINT :
Not applicable
METHOD USED : Not
applicable
FLAMMABLE LIMITS
LFL : Not
applicable
UFL : Not
applicable
HAZARDOUS COMBUSTION PRODUCTS: Under fire condition, plastic films
decompose. The smoke may contain polymer
fragments of varying compositions in addition to unidentified toxic and / or
irritating compounds. Hazardous
combustion products may include and are not limited to car- bon monoxide and
carbon dioxide.
OTHER FLAMMABLE INFORMATION:
Dense smoke is emitted when burned without sufficient oxygen.
EXTINGUISHING MEDIA:
Water, carbon dioxide, and dry chemical.
Fire fighting instructions:
Keep people away. Isolate fire
area and unnecessary entry. Cool sur-
roundings with water to localize fire zone.
Hand held carbon dioxide or dry chemical extinguishers may be used for
small fires. Soak thoroughly with water
to prevent ignition.
PROTECTIVE EQUIPMENT FOR FIREFIGHTERS: Wear positive-pressure, self-contained
breathing apparatus (SCBA) and protective fire fighting clothing (Includes fire
fighting helmet, coat, pants, boots and gloves). If protective equipment is not available or
not used, fight fire from a pro- tected location or safe distance.
6. HANDLING AND
STORAGE
HANDLING: Good
housekeeping is necessary for safe handling of product. Electrically ground all machinery. STORAGE:
The plastic stretch film should be stored in a manner that it is not exposed to
very long periods of ultra violet light.
7. PHISICAL AND
CHEMICAL PROPERTIES
APPEARANCE / PHYSICAL STATE:
Clear, light, soft plastic sheet film ODOR: No odor VAPOR PRESSURE: Not applicable VAPOR DENSITY: Not applicable BOILING POINT: Not applicable SOLUBILITY IN
WATER/MISCIBILITY: Nil SPECIFIC GRAVITY:
0.89 – 0.95 GR/CM3
8. STABILITY AND
REACTIVITY
CHEMICAL STABILITY:
Stable CONDITIONS TO AVOID: Product can decompose under elevated
temperatures INCOMPABILITY WITH OTHER MATERIALS: None known
9. ECOLOGICAL
INFORMATION
Because of the high molecular weight (MW>100), in the
terrestrial environment, material is ex- pected to remain in the soil. In the aquatic environment, the material is
expected to float.
DEGRADATION AND PERISTENCE:
This water insoluble polymeric solid is expected to be in- ert in the
environment. Surface photo degradation
is expected with exposure to ultra violet rays.
No appreciable biodegradation is expected.
ECOTOXICITY: Not
expected to be acutely toxic.
10. DISPOSAL
CONSIDERATIONS
DO NOT DUMP INTO ANY SEWERS, ON THE GROUND OR INTO ANY BODY
OF WATER. All disposal methods must be
in compliance with state / Government regulations. Regulations may vary in each location and
should be verified prior to disposal.
Waster characterizations and compli- ance with applicable laws are the
sole responsibility of the waster generator.
THE INFORMATION PRESENTED HERE PERTAINS ONLY TO THE PRODUCT
AS SHIPPED IN ITS INTENDED CONDITION AS
DESCRIBED. FOR UNUSED AND UNCONTAMINED
PRODUCT, the preferred option is to send it to a reputable company who can
recycle the product.
11. TRANSPORT
INFORMATION
Keep dry during transportation. Protect plastic film from damage to avoid
product failures at end user. Failure at
that point could result in loads being unsafely contained.
REGULATORY
INFORMATION
NOTICE: The
information here in is presented in good faith and believed to be accurate as
of the effective date shown. However, no
warranty, expressed or implied is given.
Regulatory requirements are subject to change and may differ from one
location to another. It is the buyers
responsibility to ensure that it’s activi- ties comply with federal/state or
provincial, and local laws. The
following specific information is made for the purpose of complying with
numerous federal / state or provincial and local laws and regulations.
For inquiries on this product: Text or Call: 0908-424-2232 or leave a comment below.